Verint Nextiva S1700e Series Manuel d'utilisateur télécharger pdf (Page 55)

SConfigurator User Manual

Verint Video Solutions 43

Audio\Encoder

The audio encoder (or audio input) parameters are:

 Input Type—The type of your audio source. Two modes are

supported:

 Line-in

 Mic (with pre-amp)

 Input Compression—The transfer mode for audio data. The

following modes are available:

 Uncompressed PCM (128 kbps)

 ULAW (64 kbps)—default

 GSM (16 kbps)

 Gain State—The indication of whether audio is amplified.

Setting it to Disabled corresponds to mute.

 Gain Level—The amplification level. The level is taken into

account only when the gain is enabled.

 Bias State—The indication of whether the bias is enabled on

the device. This parameter applies to the S1708e series

only.

 Bias Level—The level of voltage applied to a microphone to

set its condition of operation. The bias level is taken into

account only when the bias is enabled. The range of values

is 0–9 volt.

To change the audio encoder settings:

1. In the parameter tree, expand the Audio structure.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 98 99

Pas de commentaire

Verint Nextiva S1700e Series Manuel d'utilisateur Page 55