Verint Nextiva S1700e Series Manuel d'utilisateur télécharger pdf (Page 28)

2: Setting Up the Edge Devices

16 Verint Video Solutions

Since the S1500e series, S1700e series, S1708e series,

S2500e, and S1100w devices are mainly used with a video

management software (rather than in point-to-point

connections), you should not configure them entirely with

SConfigurator, since their settings will be overwritten in the

software. In this context, only the initial configuration (for the

wired devices) and the wireless settings (for the S1100w)

should be performed with SConfigurator.

The S1100 devices are not specifically covered, since you will

use the SmartSight Configuration Assistant tool to configure

them. However, you may have to use SConfigurator to change

their wireless settings when the devices are part of a repeater

setup.

To access the configuration parameters:

1. In the Units box, double-click the desired device.

A Unit Configuration window appears.

2. In the parameter tree, click the desired category, then

make the necessary changes. You may have to expand a

category name by clicking the plus (+) sign to its left.

3. Click OK.

Each time you change one or more settings then click OK, a

confirmation window appears. After you confirm the changes,

the device may reboot.

Parameter tree

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 98 99

Pas de commentaire

Verint Nextiva S1700e Series Manuel d'utilisateur Page 28