Verint Nextiva S1700e Series Guide d'installation télécharger pdf (Page 21)

Nextiva S1700e Series Installation Guide

Verint Video Solutions 11

3. Plug the other end of the cable into the DATA & PWR port of the

injector.

4. Connect a second Ethernet cable (straight-through or crossover) into

the DATA port of the injector.

The crossover cable is to directly connect the device to a computer;

the straight-through cable is to integrate the S1700e on a network.

Note: The maximum length of this cable is 82 feet (25 meters).

5. Connect the other end of the second cable into an Ethernet device

(for example, a switch) or a computer.

Warning: To avoid damaging your Ethernet equipment, ensure that

the cable is connected into the DATA port of the PoE

injector, and not in the DATA & PWR port.

6. Power the S1700e device by plugging the power cord between the

injector and the outlet.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Pas de commentaire

Verint Nextiva S1700e Series Guide d'installation Page 21