Verint NEXTIVA S2800E series Guide de l'utilisateur télécharger pdf (Page 37)

Nextiva S2800e Series User Guide

Verint Video Intelligence Solutions 29

Configuring the Camera

Configuring the camera involves the following operations:

 Setting Network Parameters

 Integrating the S2800e with Nextiva

 Programming the S2800e

Setting Network Parameters

SConfigurator is a proprietary Verint tool letting you assign the initial IP parameters to the

S2800e. Its latest version can be found on the Verint web site: www.verint.com/manuals.

You need to copy its executable file (SConfigurator.exe) to the hard disk of your

computer.

The minimum hardware and software requirements for the host computer needed to

configure the camera with SConfigurator are:

 An Ethernet network card

 Windows 2000 Service Pack 2 or higher, or Windows XP Service Pack 2 or higher

To set the network parameters of the S2800e:

1. Power the S2800e camera.

2. Connect the Ethernet cable to the computer or an Ethernet equipment.

3. Start SConfigurator by double-clicking SConfigurator.exe on your hard disk. The

SConfigurator window appears.

Note: To work properly, devices on the same network must have unique IP addresses. The

camera will not prevent you from entering a duplicate address. However, its system

status LED will turn to flashing red (1-second interval); then the camera will use its

default address. You then need to configure it with a proper IP address.

Nextiva S2800e Series User Guide.book Page 29 Wednesday, March 11, 2009 3:20 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 70 71

Pas de commentaire

Verint NEXTIVA S2800E series Guide de l'utilisateur Page 37