Verint Nextiva S1700e Series Guide de l'utilisateur télécharger pdf (Page 47)

Nextiva S1700e Series User Guide

Verint Video Solutions 35

Network

The Network menu allows you to configure several parameters

to ensure compatibility between the device and its IP network.

The parameters are:

 DHCP Configuration—To enable or disable the use of DHCP

(Dynamic Host Configuration Protocol) to automatically get

a valid network configuration for the device from a server.

You can set this option only if the device is connected to a

network that uses a DHCP server. For more information

about DHCP, see Appendix C on page 53.

 Local IP Address—The unique IP address of the device on

the network. The IP address format is a 32-bit numeric

address written as four numbers separated by periods.

Each number is in the 0–255 range. Each device on a

network must have a unique IP address.

 Subnet Mask—The binary configuration specifying in which

subnet the IP address of the device belongs. A subnet is a

portion of a network that shares a common address

component. Unless otherwise specified by your network

administrator, it is recommended to use a subnet mask of

255.255.255.0.

 Gateway—The IP address of the network point that acts as

an entrance to another network. Never use the IP address

of the device as the gateway value.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 94 95

Pas de commentaire

Verint Nextiva S1700e Series Guide de l'utilisateur Page 47